-- ******************************************************************** -- * Wireless LAN Access Point Management Base -- ******************************************************************** COMPEX-WIRELESS-MIB DEFINITIONS ::= BEGIN IMPORTS ifIndex FROM RFC1213-MIB enterprises, IpAddress, Unsigned32, OBJECT-TYPE, MODULE-IDENTITY FROM SNMPv2-SMI DisplayString, TruthValue, MacAddress FROM SNMPv2-TC; -- ******************************************************************** -- * MODULE IDENTITY -- ******************************************************************** cpxWirelessMIB MODULE-IDENTITY LAST-UPDATED "200601171410Z" -- Jan 17, 2006 at 14:10 GMT ORGANIZATION "Compex Inc." CONTACT-INFO "135 Joo Seng Road, #08-01 PM Industrial Building, Singapore 368363 Tel: (65) 6288-8220 Fax: (65) 6280-9947 Web Site: http:www.compex.com.sg" DESCRIPTION "The MIB module for 802.11abg Access PointRouter entities iso(1).org(3).dod(6).internet(1).private(4). enterprises(1).compex(426).wireless(8).accesspoint(1)" ::= { wireless 1} -- -- Node definitions -- -- The Enterprises Number compex OBJECT IDENTIFIER ::= { enterprises 426 } -- assigned by IANA wireless OBJECT IDENTIFIER ::= { compex 8 } -- Wireless LAN Access Point Identifier -- ********************************************************* -- System Command Information -- ********************************************************* sysCommand OBJECT IDENTIFIER ::= { cpxWirelessMIB 1 } rebootAP OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-write STATUS current DESCRIPTION "This a command field for control of AP or station. Set value 1 to reboot the AP or station." ::= { sysCommand 1 } resetAP OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-write STATUS current DESCRIPTION "This a command field for factory default setting. Set value 1 to reset the AP . It takes about 1 minute and 15 seconds for factory reset." ::= { sysCommand 2 } applyChange OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-write STATUS current DESCRIPTION "This a command field is to indicate applying the settings change made. Set value 1 to apply the change made. It takes some seconds for appling the change. Then the pop-up successful message will be shown." ::= { sysCommand 3 } wlanStatusTable OBJECT IDENTIFIER ::= { sysCommand 4 } wlanEnable1 OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "This a command field for control AP's first wireless card action. 1: enable wireless card 2: disable wireless card" ::= { wlanStatusTable 1 } wlanEnable2 OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "This a command field for control AP's second wireless card action. 1: enable wireless card 2: disable wireless card" ::= { wlanStatusTable 2 } -- ********************************************************* -- System Statistics Information -- ********************************************************* sysStatistics OBJECT IDENTIFIER ::= { cpxWirelessMIB 2 } routerName OBJECT-TYPE SYNTAX DisplayString (SIZE (1..32)) MAX-ACCESS read-write STATUS current DESCRIPTION "The field indicates the name of AP or sys Name." ::= { sysStatistics 1 } routerModel OBJECT-TYPE SYNTAX DisplayString (SIZE (0..32)) MAX-ACCESS read-only STATUS current DESCRIPTION "This attribute shall indicate Device Model name." ::= { sysStatistics 2 } firmwareVersion OBJECT-TYPE SYNTAX DisplayString (SIZE (0..128)) MAX-ACCESS read-only STATUS current DESCRIPTION "This attribute shall indicate version of firmware." ::= { sysStatistics 3 } loaderVersion OBJECT-TYPE SYNTAX DisplayString (SIZE (0..128)) MAX-ACCESS read-only STATUS current DESCRIPTION "This attribute shall indicate version of loader." ::= { sysStatistics 4 } upTime OBJECT-TYPE SYNTAX DisplayString (SIZE (0..64)) MAX-ACCESS read-only STATUS current DESCRIPTION "This attribute shall indicate upTime." ::= { sysStatistics 5 } -- ********************************************************************** -- * Wireless Settings Table -- ********************************************************************** wlanSettingTable OBJECT IDENTIFIER ::= { cpxWirelessMIB 3 } wlanSettingEntry OBJECT IDENTIFIER ::= { wlanSettingTable 1 } WlanSettingEntry ::= SEQUENCE { operationMode INTEGER, profileMode INTEGER, ssid DisplayString, countryCode INTEGER, channel INTEGER, dataRate INTEGER, wmmSupport TruthValue, beaconInterval INTEGER, rtsThreshold INTEGER, fragLength INTEGER, dtimInterval INTEGER, guardInterval INTEGER, hideNetworkName TruthValue, txPower INTEGER, antenna INTEGER, maxClients INTEGER, minStationRssi INTEGER, kickClientMacList DisplayString, channelSpectrumWidth INTEGER, ackTimeOutAuto INTEGER, ackTimeOutDistance INTEGER } operationMode OBJECT-TYPE SYNTAX INTEGER { aAP(0), aApWds(1), aStation(2), aStationWds(3), aWirelessAdapter(4) } MAX-ACCESS read-write STATUS current DESCRIPTION "This attribute shall indicate the desired device operation mode. The option are: APMode - Work as a generic wired to wireless bridging. ClientMode - Act as standard wireless client, but it can bridge wired packets into wireless network. PtP - Point to Point Bridge(Wireless Bridge Link). PtMP - Point to Multiple Point. WRC - Wireless Routing Client. Wireless interface as a logical WAN. WEA - Wireless Ethernet Adapte(Single Computer)" ::= { wlanSettingEntry 2 } profileMode OBJECT-TYPE SYNTAX INTEGER { dot11a(1), dot11bonly(2), dot11bgmixed(3), dot11gonly(4), superA(5), superG(6), a11NA(7), a11NG(8) } MAX-ACCESS read-only STATUS current DESCRIPTION "This attribute shall indicate the desired wireless operating mode. The option are: dot11a - Only 802.11a wireless stations can be used. dot11bonly - All 802.11b wireless stations can be used. 802.11g wireless stations can still be used if they can operate in 802.11b mode. dot11bgmixed - All 802.11b or 802.11g wireless stations can be used dot11gonly - Only 802.11g wireless stations can be used. superA - Atheros superA support, but other vendors' 802.11a - wireless stations still can be used. superG - Atheros superG support, but other vendors' 802.11bg - wireless stations still can be used." ::= { wlanSettingEntry 3 } ssid OBJECT-TYPE SYNTAX DisplayString (SIZE (0..32)) MAX-ACCESS read-write STATUS current DESCRIPTION "This attribute shall indicate SSID.Its length can't be large than 33 ." ::= { wlanSettingEntry 4 } countryCode OBJECT-TYPE SYNTAX INTEGER { nocountry(0), albania(8), algeria(12), azerbaijan(31), argentina(32), australia(36), austria(40), bahrain(48), armenia(51), belgium(56), bolvia(68), brazil(76), belize(84), brunei(96), bulgaria(100), canada(124), chile(152), china(156), taiwan(158), colombia(170), costarica(188), croatia(191), cyprus(196), czechrepublic(203), denmark(208), dominicanrepublic(214), ecuador(218), elsalvador(222), estonia(233), finland(246), france(250), franceres(255), georgia(268), germany(276), greece(300), guatemala(320), honduras(340), hongkong(344), hungary(348), iceland(352), india(356), indonesia(360), iran(364), ireland(372), israel(376), italy(380), japan(392), japan1(393), japan2(394), japan3(395), japan4(396), japan5(397), kazakhstan(398), japan6(399), jordan(400), northkorea(408), korearepublic(410), korearepublic2(411), kuwait(414), lebanon(422), latvia(428), liechtenstein(438), lithuania(440), luxembourg(442), macau(446), malaysia(458), malta(470), mexico(484), monaco(492), morocco(504), oman(512), netherlands(528), newzealand(554), norway(578), pakistan(586), panama(591), peru(604), philippines(608), poland(616), portugal(620), puertorico(630), qatar(634), romania(642), russia(643), saudiarabia(682), singapore(702), slovakrepublic(703), vietnam(704), slovenia(705), southafrica(710), zimbabwe(716), spain(724), sweden(752), switzerland(756), syria(760), thailand(764), trinidadtobago(780), unitedarabemirates(784), tunisia(788), turkey(792), ukraine(804), macedonia(807), egypt(818), unitedkingdom(826), unitedstates(840), uruguay(858), uzbekistan(860), venezuela(862), yemen(887) } MAX-ACCESS read-write STATUS current DESCRIPTION "This attribute shall indicate the region of operation for which which the wireless interface is inted." ::= { wlanSettingEntry 5 } channel OBJECT-TYPE SYNTAX INTEGER (1..255) MAX-ACCESS read-write STATUS current DESCRIPTION "This attribute shall indicate the channel number to use on your Wireless LAN. 1: CH01 2412MHz 2: CH02 2417MHz 3: CH03 2422MHz 4: CH04 2427MHz 5: CH05 2432MHz 6: CH06 2437MHz 7: CH07 2442MHz 8: CH08 2447MHz 9: CH09 2452MHz 10: CH10 2457MHz 11: CH11 2462MHz 12: CH12 2467MHz 13: CH13 2472MHz 14: CH14 2484MHz 36: CH36 5180MHz 40: CH40 5200MHz 44: CH44 5220MHz 48: CH48 5240MHz 52: CH52 5260MHz 56: CH56 5280MHz 60: CH60 5300MHz 64: CH64 5320MHz 149:CH149 5745MHz 153:CH153 5765MHz 157:CH157 5785MHz 161:CH161 5805MHz 165:CH165 5825MHz" ::= { wlanSettingEntry 6 } dataRate OBJECT-TYPE SYNTAX INTEGER { aAuto(0), aNG-6-Mbps(1), aNG-9-Mbps(2), aNG-12-Mbps(3), aNG-18-Mbps(4), aNG-24-Mbps(5), aNG-36-Mbps(6), aNG-48-Mbps(7), aNG-54-Mbps(8), aNG-MCS-0-NG-13p5-Mbps(9), aNG-MCS-1-NG-27-Mbps(10), aNG-MCS-2-NG-40p5-Mbps(11), aNG-MCS-3-NG-54-Mbps(12), aNG-MCS-4-NG-81-Mbps(13), aNG-MCS-5-NG-108-Mbps(14), aNG-MCS-6-NG-121p5-Mbps(15), aNG-MCS-7-NG-150-Mbps(16), aNG-MCS-8-NG-27-Mbps(17), aNG-MCS-9-NG-54-Mbps(18), aNG-MCS-10-NG-81-Mbps(19), aNG-MCS-11-NG-108-Mbps(20), aNG-MCS-12-NG-162-Mbps(21), aNG-MCS-13-NG-216-Mbps(22), aNG-MCS-14-NG-243-Mbps(23), aNG-MCS-15-NG-300-Mbps(24) } MAX-ACCESS read-write STATUS current DESCRIPTION "This attribute shall indicate the transmit rate. Value range: 0~24 as below: aAuto(0), aNG-6-Mbps(1), aNG-9-Mbps(2), aNG-12-Mbps(3), aNG-18-Mbps(4), aNG-24-Mbps(5), aNG-36-Mbps(6), aNG-48-Mbps(7), aNG-54-Mbps(8), aNG-MCS-0-NG-13p5-Mbps(9), aNG-MCS-1-NG-27-Mbps(10), aNG-MCS-2-NG-40p5-Mbps(11), aNG-MCS-3-NG-54-Mbps(12), aNG-MCS-4-NG-81-Mbps(13), aNG-MCS-5-NG-108-Mbps(14), aNG-MCS-6-NG-121p5-Mbps(15), aNG-MCS-7-NG-150-Mbps(16), aNG-MCS-8-NG-27-Mbps(17), aNG-MCS-9-NG-54-Mbps(18), aNG-MCS-10-NG-81-Mbps(19), aNG-MCS-11-NG-108-Mbps(20), aNG-MCS-12-NG-162-Mbps(21), aNG-MCS-13-NG-216-Mbps(22), aNG-MCS-14-NG-243-Mbps(23), aNG-MCS-15-NG-300-Mbps(24)" ::= { wlanSettingEntry 7 } wmmSupport OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "This field indicates whether support WMM(Wireless Multimedia)." ::= { wlanSettingEntry 8 } beaconInterval OBJECT-TYPE SYNTAX INTEGER (20..1000) MAX-ACCESS read-write STATUS current DESCRIPTION "This attribute shall indicate the Beacon Interval." ::= { wlanSettingEntry 9 } rtsThreshold OBJECT-TYPE SYNTAX INTEGER (0..2346) MAX-ACCESS read-write STATUS current DESCRIPTION "This attribute shall indicate the RTS threshold." ::= { wlanSettingEntry 10 } fragLength OBJECT-TYPE SYNTAX INTEGER (256..2346) MAX-ACCESS read-write STATUS current DESCRIPTION "This attribute shall indicate the fragmentation threshold." ::= { wlanSettingEntry 11 } dtimInterval OBJECT-TYPE SYNTAX INTEGER (1..255) MAX-ACCESS read-write STATUS current DESCRIPTION "This attribute shall indicate the DTIM period." ::= { wlanSettingEntry 12 } guardInterval OBJECT-TYPE SYNTAX INTEGER { long(0), short(1) } MAX-ACCESS read-write STATUS current DESCRIPTION "This attribute shall indicate the preamble setting." ::= { wlanSettingEntry 13 } hideNetworkName OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "This attribute shall indicate whether broadcast wireless network Name (SSID)." ::= { wlanSettingEntry 14 } -- ********************************************************************** -- * Associated Client Detailed Information -- ********************************************************************** associatedClientTable OBJECT-TYPE SYNTAX SEQUENCE OF AssociatedClientEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "Associated clients detailed information table." ::= { cpxWirelessMIB 5 } associatedClientEntry OBJECT-TYPE SYNTAX AssociatedClientEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "Associated clients detailed information table entry." INDEX { ifIndex, acMacAddress } ::= { associatedClientTable 1 } AssociatedClientEntry ::= SEQUENCE { ifIndex INTEGER, acMacAddress MacAddress, acSsid DisplayString, acRssi Integer32 } acMacAddress OBJECT-TYPE SYNTAX MacAddress ACCESS read-only STATUS current DESCRIPTION "MAC address of the associated client." ::= { associatedClientEntry 1 } acSsid OBJECT-TYPE SYNTAX DisplayString (SIZE (0..20)) ACCESS read-only STATUS current DESCRIPTION "" ::= { associatedClientEntry 2 } acRssi OBJECT-TYPE SYNTAX Integer32 ACCESS read-only STATUS current DESCRIPTION "" ::= { associatedClientEntry 3 } -- ********************************************************************** -- * Security Settings Table -- ********************************************************************** securitySettings OBJECT IDENTIFIER ::= { cpxWirelessMIB 6 } securityAuthType OBJECT-TYPE SYNTAX INTEGER { none(0), wepOpenSystem(1), wepSharedKey(2), wpaPsk(3), wpa2Psk(4), wpaPskWpa2PskMixedMode(5), wpaEap(6), wpa2Eap(7) } MAX-ACCESS read-write STATUS current DESCRIPTION "This field indicates ..." ::= { securitySettings 2 } securityUsedKeySlot OBJECT-TYPE SYNTAX INTEGER { key1(1), key2(2), key3(3), key4(4) } MAX-ACCESS read-write STATUS current DESCRIPTION "This field indicates ..." ::= { securitySettings 3 } securityKey1 OBJECT-TYPE SYNTAX DisplayString (SIZE (0..64)) MAX-ACCESS read-write STATUS current DESCRIPTION "This field indicates..." ::= { securitySettings 4 } securityKey2 OBJECT-TYPE SYNTAX DisplayString (SIZE (0..64)) MAX-ACCESS read-write STATUS current DESCRIPTION "This field indicates..." ::= { securitySettings 5 } securityKey3 OBJECT-TYPE SYNTAX DisplayString (SIZE (0..64)) MAX-ACCESS read-write STATUS current DESCRIPTION "This field indicates..." ::= { securitySettings 6 } securityKey4 OBJECT-TYPE SYNTAX DisplayString (SIZE (0..64)) MAX-ACCESS read-write STATUS current DESCRIPTION "This field indicates..." ::= { securitySettings 7 } securityCipher OBJECT-TYPE SYNTAX INTEGER { auto(0), ccmpAes(1), tkipAndCcmpAes(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "This field indicates ..." ::= { securitySettings 8 } securityKey OBJECT-TYPE SYNTAX DisplayString (SIZE (0..64)) MAX-ACCESS read-write STATUS current DESCRIPTION "This field indicates..." ::= { securitySettings 9 } securityRadiusAuthServer OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-write STATUS current DESCRIPTION "Internet address of the Radius Authentication Server." ::= { securitySettings 10 } securityRadiusAuthPort OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-write STATUS current DESCRIPTION "Port number used for authentication at the Radius Authentication Server." ::= { securitySettings 11 } securityRadiusAuthSecret OBJECT-TYPE SYNTAX DisplayString (SIZE (0..64)) MAX-ACCESS read-write STATUS current DESCRIPTION "This field indicates..." ::= { securitySettings 12 } securityRadiusAcntServer OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-write STATUS current DESCRIPTION "Internet address of the Radius Accounting Server." ::= { securitySettings 13 } securityRadiusAcntPort OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-write STATUS current DESCRIPTION "Port number used for authentication at the Radius Accounting Server." ::= { securitySettings 14 } securityRadiusAcntSecret OBJECT-TYPE SYNTAX DisplayString (SIZE (0..64)) MAX-ACCESS read-write STATUS current DESCRIPTION "This field indicates..." ::= { securitySettings 15 } securityNasId OBJECT-TYPE SYNTAX DisplayString (SIZE (0..64)) MAX-ACCESS read-write STATUS current DESCRIPTION "This field indicates..." ::= { securitySettings 16 } -- ********************************************************************** -- * Security Settings Entry2 -- ********************************************************************** -- ********************************************************* -- 802.1x Information Table -- ********************************************************* dot1xInfoTable OBJECT IDENTIFIER ::= { cpxWirelessMIB 7 } dot1xInfoEntry OBJECT IDENTIFIER ::= { dot1xInfoTable 1 } Dot1xInfoEntry ::= SEQUENCE { priRadIpAddr IpAddress, sndRadIpAddr IpAddress, radAuthPort INTEGER, radAcntPort INTEGER, radSharedSecret DisplayString } priRadIpAddr OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-write STATUS current DESCRIPTION "Internet address of the Primary Radius Server." ::= { dot1xInfoEntry 1 } sndRadIpAddr OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-write STATUS current DESCRIPTION "Internet address of the Second Radius Server." ::= { dot1xInfoEntry 2 } radAuthPort OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-write STATUS current DESCRIPTION "Port number used for authentication at the Radius Server." ::= { dot1xInfoEntry 3 } radAcntPort OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-write STATUS current DESCRIPTION "port number of the radius account server." ::= { dot1xInfoEntry 4 } radSharedSecret OBJECT-TYPE SYNTAX DisplayString (SIZE (0..127)) MAX-ACCESS read-write STATUS current DESCRIPTION "Secret shared between NAS and the Radius Server." ::= { dot1xInfoEntry 5 } -- ********************************************************* -- 802.1x Information Entry2 -- ********************************************************* dot1xInfoEntry2 OBJECT IDENTIFIER ::= { dot1xInfoTable 2 } Dot1xInfoEntry2 ::= SEQUENCE { priRadIpAddr2 IpAddress, sndRadIpAddr2 IpAddress, radAuthPort2 INTEGER, radAcntPort2 INTEGER, radSharedSecret2 DisplayString } priRadIpAddr2 OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-write STATUS current DESCRIPTION "Internet address of the Primary Radius Server." ::= { dot1xInfoEntry2 1 } sndRadIpAddr2 OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-write STATUS current DESCRIPTION "Internet address of the Second Radius Server." ::= { dot1xInfoEntry2 2 } radAuthPort2 OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-write STATUS current DESCRIPTION "Port number used for authentication at the Radius Server." ::= { dot1xInfoEntry2 3 } radAcntPort2 OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-write STATUS current DESCRIPTION "port number of the radius account server." ::= { dot1xInfoEntry2 4 } radSharedSecret2 OBJECT-TYPE SYNTAX DisplayString (SIZE (0..127)) MAX-ACCESS read-write STATUS current DESCRIPTION "Secret shared between NAS and the Radius Server." ::= { dot1xInfoEntry2 5 } -- ********************************************************* -- 802.1x Ethernet Setting Info. -- ********************************************************* lanWanSettings OBJECT IDENTIFIER ::= { cpxWirelessMIB 8 } lanSettings OBJECT IDENTIFIER ::= { lanWanSettings 1 } LanSettings ::= SEQUENCE { lanProtocol INTEGER, lanIpv4Address IpAddress, lanNetmaskAddr IpAddress, lanGatewayAddr IpAddress, lanCustomDnsServers IpAddress } lanProtocol OBJECT-TYPE SYNTAX INTEGER { static(0), dhcpClient(1) } MAX-ACCESS read-write STATUS current DESCRIPTION "" ::= { lanSettings 1 } lanIpv4Address OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-write STATUS current DESCRIPTION "" ::= { lanSettings 2 } lanNetmaskAddr OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-write STATUS current DESCRIPTION "" ::= { lanSettings 3 } lanGatewayAddr OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-write STATUS current DESCRIPTION "" ::= { lanSettings 4 } lanCustomDnsServers OBJECT-TYPE SYNTAX DisplayString (SIZE (1..256)) MAX-ACCESS read-write STATUS current DESCRIPTION "A list of IP addresses linked by semicolon ;. Example: 192.168.1.1;192.168.1.2;192.168.1.3" ::= { lanSettings 5 } -- ********************************************************* -- 802.1x Ethernet Setting Entry2 . -- ********************************************************* wanSettings OBJECT IDENTIFIER ::= { lanWanSettings 2 } WanSettings ::= SEQUENCE { wanProtocol INTEGER, wanIpv4Address IpAddress, wanNetmaskAddr IpAddress, wanGatewayAddr IpAddress, wanCustomDnsServers IpAddress } wanProtocol OBJECT-TYPE SYNTAX INTEGER { static(0), dhcpClient(1), aPPTP(2), aPPPoE(3), aL2TP(4) } MAX-ACCESS read-write STATUS current DESCRIPTION "" ::= { wanSettings 1 } wanIpv4Address OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-write STATUS current DESCRIPTION "" ::= { wanSettings 2 } wanNetmaskAddr OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-write STATUS current DESCRIPTION "" ::= { wanSettings 3 } wanGatewayAddr OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-write STATUS current DESCRIPTION "" ::= { wanSettings 4 } wanCustomDnsServers OBJECT-TYPE SYNTAX DisplayString (SIZE (1..256)) MAX-ACCESS read-write STATUS current DESCRIPTION "A list of IP addresses linked by semicolon ;. Example: 192.168.1.1;192.168.1.2;192.168.1.3" ::= { wanSettings 5 } -- ********************************************************* -- 802.1x Ethernet Statistics Table. -- ********************************************************* ethStatisticsTable OBJECT IDENTIFIER ::= { cpxWirelessMIB 9 } ethStatisticsEntry OBJECT IDENTIFIER ::= { ethStatisticsTable 1 } EthStatisticsEntry ::= SEQUENCE { ethConnectedStatus INTEGER, ethUptime DisplayString, ethMacAddress IpAddress, ethRxBytes INTEGER, ethTxBytes INTEGER } ethConnectedStatus OBJECT-TYPE SYNTAX INTEGER { disconnected(0), connected(1) } MAX-ACCESS read-only STATUS current DESCRIPTION "" ::= { ethStatisticsEntry 1 } ethUptime OBJECT-TYPE SYNTAX DisplayString (SIZE (0..64)) MAX-ACCESS read-only STATUS current DESCRIPTION "This attribute shall indicate upTime of br-lan interface." ::= { ethStatisticsEntry 2 } ethMacAddress OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-only STATUS current DESCRIPTION "" ::= { ethStatisticsEntry 3 } ethRxBytes OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-only STATUS current DESCRIPTION "" ::= { ethStatisticsEntry 4 } ethTxBytes OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-only STATUS current DESCRIPTION "" ::= { ethStatisticsEntry 5 } ethRxErrorPackets OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-only STATUS current DESCRIPTION "" ::= { ethStatisticsEntry 6 } ethTxErrorPackets OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-only STATUS current DESCRIPTION "" ::= { ethStatisticsEntry 7 } ethRxRealTimeRate OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-only STATUS current DESCRIPTION "Value in Kbps" ::= { ethStatisticsEntry 8 } ethTxRealTimeRate OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-only STATUS current DESCRIPTION "Value in Kbps" ::= { ethStatisticsEntry 9 } -- ********************************************************* -- 802.1x Ethernet Statistics Table Entry 2. -- ********************************************************* ethStatisticsEntry2 OBJECT IDENTIFIER ::= { ethStatisticsTable 2 } EthStatisticsEntry2 ::= SEQUENCE { ethConnectedStatus2 INTEGER, ethUptime2 DisplayString, ethMacAddress2 IpAddress, ethRxBytes2 INTEGER, ethTxBytes2 INTEGER } ethConnectedStatus2 OBJECT-TYPE SYNTAX INTEGER { disconnected(0), connected(1) } MAX-ACCESS read-only STATUS current DESCRIPTION "" ::= { ethStatisticsEntry2 1 } ethUptime2 OBJECT-TYPE SYNTAX DisplayString (SIZE (0..64)) MAX-ACCESS read-only STATUS current DESCRIPTION "This attribute shall indicate upTime of eth0.2 interface." ::= { ethStatisticsEntry2 2 } ethMacAddress2 OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-only STATUS current DESCRIPTION "" ::= { ethStatisticsEntry2 3 } ethRxBytes2 OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-only STATUS current DESCRIPTION "" ::= { ethStatisticsEntry2 4 } ethTxBytes2 OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-only STATUS current DESCRIPTION "" ::= { ethStatisticsEntry2 5 } ethRxErrorPackets2 OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-only STATUS current DESCRIPTION "" ::= { ethStatisticsEntry2 6 } ethTxErrorPackets2 OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-only STATUS current DESCRIPTION "" ::= { ethStatisticsEntry2 7 } ethRxRealTimeRate2 OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-only STATUS current DESCRIPTION "Value in Kbps" ::= { ethStatisticsEntry2 8 } ethTxRealTimeRate2 OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-only STATUS current DESCRIPTION "Value in Kbps" ::= { ethStatisticsEntry2 9 } -- ********************************************************************** -- * DHCP Server Setting Table -- ********************************************************************** dhcpsSettings OBJECT IDENTIFIER ::= { cpxWirelessMIB 10 } dhcpServer OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "This attribute shall indicate whether DHCP server is enabled or disabled." ::= { dhcpsSettings 1 } dhcpServerIpStart OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-write STATUS current DESCRIPTION "This attribute indicates the starting IP address of DHCP server will give. ***The value can only be set to a IP address in dot format. This field is effected after 'dhcpServer' is set to '1' ." ::= { dhcpsSettings 2 } dhcpServerIpEnd OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-write STATUS current DESCRIPTION "This attribute indicates the ending IP address of DHCP server will give. ***The value can only be set to a IP address in dot format. This field is effected after 'dhcpServer' is set to '1'. " ::= { dhcpsSettings 3 } dhcpNetmask OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-write STATUS current DESCRIPTION "This attribute indicates the net mask of DHCP server will give. ***The value can only be set to the net mask address in dot format. This field is effected after 'dhcpServer' is set to '1' " ::= { dhcpsSettings 4 } dhcpServerGateway OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-write STATUS current DESCRIPTION "This attribute indicates the gateway IP address of DHCP server will give. ***The value can only be set to a IP address in dot format." ::= { dhcpsSettings 5 } dhcpServerPriDns OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-write STATUS current DESCRIPTION "This attribute indicates the primary DNS IP address of DHCP server will give. ***The value can only be set to a IP address in dot format." ::= { dhcpsSettings 6 } dhcpServerSndDns OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-write STATUS current DESCRIPTION "This attribute indicates the secondary DNS IP address of DHCP server will give. ***The value can only be set to a IP address in dot format." ::= { dhcpsSettings 7 } dhcpServerLeaseTime OBJECT-TYPE SYNTAX INTEGER (15..44640) MAX-ACCESS read-write STATUS current DESCRIPTION "This attribute shall indicate the IP lease time of DHCP server will give to DHCP clients in minutes" ::= { dhcpsSettings 8 } -- ********************************************************* -- dhcpactiveleasesTable -- ********************************************************* dhcpactiveleasesTable OBJECT-TYPE SYNTAX SEQUENCE OF DhcpactiveleasesEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "DESCRIPTION: ..." ::= { cpxWirelessMIB 11 } dhcpactiveleasesEntry OBJECT-TYPE SYNTAX DhcpactiveleasesEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A row describing a given working group" INDEX { dhcpactiveleasesMACaddress } ::= {dhcpactiveleasesTable 1 } DhcpactiveleasesEntry ::= SEQUENCE { dhcpactiveleasesMACaddress MacAddress, dhcpactiveleasesHost DisplayString, dhcpactiveleasesExpiry DisplayString, dhcpactiveleasesIpAddr IpAddress } dhcpactiveleasesMACaddress OBJECT-TYPE SYNTAX MacAddress MAX-ACCESS read-only STATUS current DESCRIPTION "The field indicates a string." ::= { dhcpactiveleasesEntry 1 } dhcpactiveleasesHost OBJECT-TYPE SYNTAX DisplayString (SIZE (0..30)) MAX-ACCESS read-only STATUS current DESCRIPTION "The field indicates a string." ::= { dhcpactiveleasesEntry 2 } dhcpactiveleasesExpiry OBJECT-TYPE SYNTAX DisplayString (SIZE (0..20)) MAX-ACCESS read-only STATUS current DESCRIPTION "The field indicates a string." ::= { dhcpactiveleasesEntry 3 } dhcpactiveleasesIpAddr OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-only STATUS current DESCRIPTION "The field indicates a string." ::= { dhcpactiveleasesEntry 4 } -- ********************************************************* -- maclientstsettings -- ********************************************************* maclientstsettings OBJECT IDENTIFIER ::= { cpxWirelessMIB 12 } maclientstIndex OBJECT-TYPE SYNTAX INTEGER (0..15) MAX-ACCESS read-write STATUS current DESCRIPTION "This field indicates Index of Interface(ex: 0 indicates for ath0, 1 indicates for ath1 ). The others fields depend on this Index." ::= { maclientstsettings 1 } maclientstEnabled OBJECT-TYPE SYNTAX INTEGER { disabledFilter(0), allowedMacList(1), deniedMacList(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "This field indicates ..." ::= { maclientstsettings 2 } maclientstMacAddr OBJECT-TYPE SYNTAX DisplayString (SIZE (0..1152)) MAX-ACCESS read-write STATUS current DESCRIPTION "This field indicates list of MAC Address connected by semicolon. Ex: 00:11:22:33:44:55;00:11:22:33:44:66;00:11:22:33:44:77" ::= { maclientstsettings 3 } -- ********************************************************************** -- * System Basic Setting Table -- ********************************************************************** timeSettings OBJECT IDENTIFIER ::= { cpxWirelessMIB 14 } localtime OBJECT-TYPE SYNTAX DisplayString (SIZE (1..20)) MAX-ACCESS read-write STATUS current DESCRIPTION "This attributes shall indicates the current system time in a format: YYYYMMDD hh:mm:ss." ::= { timeSettings 1 } timezone OBJECT-TYPE SYNTAX INTEGER { aUTC(-1), aAfricaAbidjan(0), aAfricaAccra(1), aAfricaAddis_Ababa(2), aAfricaAlgiers(3), aAfricaAsmara(4), aAfricaBamako(5), aAfricaBangui(6), aAfricaBanjul(7), aAfricaBissau(8), aAfricaBlantyre(9), aAfricaBrazzaville(10), aAfricaBujumbura(11), aAfricaCasablanca(12), aAfricaCeuta(13), aAfricaConakry(14), aAfricaDakar(15), aAfricaDar_es_Salaam(16), aAfricaDjibouti(17), aAfricaDouala(18), aAfricaEl_Aaiun(19), aAfricaFreetown(20), aAfricaGaborone(21), aAfricaHarare(22), aAfricaJohannesburg(23), aAfricaJuba(24), aAfricaKampala(25), aAfricaKhartoum(26), aAfricaKigali(27), aAfricaKinshasa(28), aAfricaLagos(29), aAfricaLibreville(30), aAfricaLome(31), aAfricaLuanda(32), aAfricaLubumbashi(33), aAfricaLusaka(34), aAfricaMalabo(35), aAfricaMaputo(36), aAfricaMaseru(37), aAfricaMbabane(38), aAfricaMogadishu(39), aAfricaMonrovia(40), aAfricaNairobi(41), aAfricaNdjamena(42), aAfricaNiamey(43), aAfricaNouakchott(44), aAfricaOuagadougou(45), aAfricaPorto-Novo(46), aAfricaSao_Tome(47), aAfricaTripoli(48), aAfricaTunis(49), aAfricaWindhoek(50), aAmericaAdak(51), aAmericaAnchorage(52), aAmericaAnguilla(53), aAmericaAntigua(54), aAmericaAraguaina(55), aAmericaArgentinaBuenos_Aires(56), aAmericaArgentinaCatamarca(57), aAmericaArgentinaCordoba(58), aAmericaArgentinaJujuy(59), aAmericaArgentinaLa_Rioja(60), aAmericaArgentinaMendoza(61), aAmericaArgentinaRio_Gallegos(62), aAmericaArgentinaSalta(63), aAmericaArgentinaSan_Juan(64), aAmericaArgentinaTucuman(65), aAmericaArgentinaUshuaia(66), aAmericaAruba(67), aAmericaAsuncion(68), aAmericaAtikokan(69), aAmericaBahia(70), aAmericaBahia_Banderas(71), aAmericaBarbados(72), aAmericaBelem(73), aAmericaBelize(74), aAmericaBlanc-Sablon(75), aAmericaBoa_Vista(76), aAmericaBogota(77), aAmericaBoise(78), aAmericaCambridge_Bay(79), aAmericaCampo_Grande(80), aAmericaCancun(81), aAmericaCaracas(82), aAmericaCayenne(83), aAmericaCayman(84), aAmericaChicago(85), aAmericaChihuahua(86), aAmericaCosta_Rica(87), aAmericaCuiaba(88), aAmericaCuracao(89), aAmericaDanmarkshavn(90), aAmericaDawson(91), aAmericaDawson_Creek(92), aAmericaDenver(93), aAmericaDetroit(94), aAmericaDominica(95), aAmericaEdmonton(96), aAmericaEirunepe(97), aAmericaEl_Salvador(98), aAmericaFortaleza(99), aAmericaGlace_Bay(100), aAmericaGoose_Bay(101), aAmericaGrand_Turk(102), aAmericaGrenada(103), aAmericaGuadeloupe(104), aAmericaGuatemala(105), aAmericaGuayaquil(106), aAmericaGuyana(107), aAmericaHalifax(108), aAmericaHavana(109), aAmericaHermosillo(110), aAmericaIndianaIndianapolis(111), aAmericaIndianaKnox(112), aAmericaIndianaMarengo(113), aAmericaIndianaPetersburg(114), aAmericaIndianaTell_City(115), aAmericaIndianaVevay(116), aAmericaIndianaVincennes(117), aAmericaIndianaWinamac(118), aAmericaInuvik(119), aAmericaIqaluit(120), aAmericaJamaica(121), aAmericaJuneau(122), aAmericaKentuckyLouisville(123), aAmericaKentuckyMonticello(124), aAmericaKralendijk(125), aAmericaLa_Paz(126), aAmericaLima(127), aAmericaLos_Angeles(128), aAmericaLower_Princes(129), aAmericaMaceio(130), aAmericaManagua(131), aAmericaManaus(132), aAmericaMarigot(133), aAmericaMartinique(134), aAmericaMatamoros(135), aAmericaMazatlan(136), aAmericaMenominee(137), aAmericaMerida(138), aAmericaMetlakatla(139), aAmericaMexico_City(140), aAmericaMiquelon(141), aAmericaMoncton(142), aAmericaMonterrey(143), aAmericaMontevideo(144), aAmericaMontreal(145), aAmericaMontserrat(146), aAmericaNassau(147), aAmericaNew_York(148), aAmericaNipigon(149), aAmericaNome(150), aAmericaNoronha(151), aAmericaNorth_DakotaBeulah(152), aAmericaNorth_DakotaCenter(153), aAmericaNorth_DakotaNew_Salem(154), aAmericaOjinaga(155), aAmericaPanama(156), aAmericaPangnirtung(157), aAmericaParamaribo(158), aAmericaPhoenix(159), aAmericaPort_of_Spain(160), aAmericaPort-au-Prince(161), aAmericaPorto_Velho(162), aAmericaPuerto_Rico(163), aAmericaRainy_River(164), aAmericaRankin_Inlet(165), aAmericaRecife(166), aAmericaRegina(167), aAmericaResolute(168), aAmericaRio_Branco(169), aAmericaSanta_Isabel(170), aAmericaSantarem(171), aAmericaSanto_Domingo(172), aAmericaSao_Paulo(173), aAmericaScoresbysund(174), aAmericaShiprock(175), aAmericaSitka(176), aAmericaSt_Barthelemy(177), aAmericaSt_Johns(178), aAmericaSt_Kitts(179), aAmericaSt_Lucia(180), aAmericaSt_Thomas(181), aAmericaSt_Vincent(182), aAmericaSwift_Current(183), aAmericaTegucigalpa(184), aAmericaThule(185), aAmericaThunder_Bay(186), aAmericaTijuana(187), aAmericaToronto(188), aAmericaTortola(189), aAmericaVancouver(190), aAmericaWhitehorse(191), aAmericaWinnipeg(192), aAmericaYakutat(193), aAmericaYellowknife(194), aAntarcticaCasey(195), aAntarcticaDavis(196), aAntarcticaDumontDUrville(197), aAntarcticaMacquarie(198), aAntarcticaMawson(199), aAntarcticaMcMurdo(200), aAntarcticaRothera(201), aAntarcticaSouth_Pole(202), aAntarcticaSyowa(203), aAntarcticaVostok(204), aArcticLongyearbyen(205), aAsiaAden(206), aAsiaAlmaty(207), aAsiaAnadyr(208), aAsiaAqtau(209), aAsiaAqtobe(210), aAsiaAshgabat(211), aAsiaBaghdad(212), aAsiaBahrain(213), aAsiaBaku(214), aAsiaBangkok(215), aAsiaBeirut(216), aAsiaBishkek(217), aAsiaBrunei(218), aAsiaChoibalsan(219), aAsiaChongqing(220), aAsiaColombo(221), aAsiaDamascus(222), aAsiaDhaka(223), aAsiaDili(224), aAsiaDubai(225), aAsiaDushanbe(226), aAsiaGaza(227), aAsiaHarbin(228), aAsiaHebron(229), aAsiaHo_Chi_Minh(230), aAsiaHong_Kong(231), aAsiaHovd(232), aAsiaIrkutsk(233), aAsiaJakarta(234), aAsiaJayapura(235), aAsiaKabul(236), aAsiaKamchatka(237), aAsiaKarachi(238), aAsiaKashgar(239), aAsiaKathmandu(240), aAsiaKolkata(241), aAsiaKrasnoyarsk(242), aAsiaKuala_Lumpur(243), aAsiaKuching(244), aAsiaKuwait(245), aAsiaMacau(246), aAsiaMagadan(247), aAsiaMakassar(248), aAsiaManila(249), aAsiaMuscat(250), aAsiaNicosia(251), aAsiaNovokuznetsk(252), aAsiaNovosibirsk(253), aAsiaOmsk(254), aAsiaOral(255), aAsiaPhnom_Penh(256), aAsiaPontianak(257), aAsiaPyongyang(258), aAsiaQatar(259), aAsiaQyzylorda(260), aAsiaRangoon(261), aAsiaRiyadh(262), aAsiaSakhalin(263), aAsiaSamarkand(264), aAsiaSeoul(265), aAsiaShanghai(266), aAsiaSingapore(267), aAsiaTaipei(268), aAsiaTashkent(269), aAsiaTbilisi(270), aAsiaThimphu(271), aAsiaTokyo(272), aAsiaUlaanbaatar(273), aAsiaUrumqi(274), aAsiaVientiane(275), aAsiaVladivostok(276), aAsiaYakutsk(277), aAsiaYekaterinburg(278), aAsiaYerevan(279), aAtlanticAzores(280), aAtlanticBermuda(281), aAtlanticCanary(282), aAtlanticCape_Verde(283), aAtlanticFaroe(284), aAtlanticMadeira(285), aAtlanticReykjavik(286), aAtlanticSouth_Georgia(287), aAtlanticSt_Helena(288), aAtlanticStanley(289), aAustraliaAdelaide(290), aAustraliaBrisbane(291), aAustraliaBroken_Hill(292), aAustraliaCurrie(293), aAustraliaDarwin(294), aAustraliaEucla(295), aAustraliaHobart(296), aAustraliaLindeman(297), aAustraliaLord_Howe(298), aAustraliaMelbourne(299), aAustraliaPerth(300), aAustraliaSydney(301), aEuropeAmsterdam(302), aEuropeAndorra(303), aEuropeAthens(304), aEuropeBelgrade(305), aEuropeBerlin(306), aEuropeBratislava(307), aEuropeBrussels(308), aEuropeBucharest(309), aEuropeBudapest(310), aEuropeChisinau(311), aEuropeCopenhagen(312), aEuropeDublin(313), aEuropeGibraltar(314), aEuropeGuernsey(315), aEuropeHelsinki(316), aEuropeIsle_of_Man(317), aEuropeIstanbul(318), aEuropeJersey(319), aEuropeKaliningrad(320), aEuropeKiev(321), aEuropeLisbon(322), aEuropeLjubljana(323), aEuropeLondon(324), aEuropeLuxembourg(325), aEuropeMadrid(326), aEuropeMalta(327), aEuropeMariehamn(328), aEuropeMinsk(329), aEuropeMonaco(330), aEuropeMoscow(331), aEuropeOslo(332), aEuropeParis(333), aEuropePodgorica(334), aEuropePrague(335), aEuropeRiga(336), aEuropeRome(337), aEuropeSamara(338), aEuropeSan_Marino(339), aEuropeSarajevo(340), aEuropeSimferopol(341), aEuropeSkopje(342), aEuropeSofia(343), aEuropeStockholm(344), aEuropeTallinn(345), aEuropeTirane(346), aEuropeUzhgorod(347), aEuropeVaduz(348), aEuropeVatican(349), aEuropeVienna(350), aEuropeVilnius(351), aEuropeVolgograd(352), aEuropeWarsaw(353), aEuropeZagreb(354), aEuropeZaporozhye(355), aEuropeZurich(356), aIndianAntananarivo(357), aIndianChagos(358), aIndianChristmas(359), aIndianCocos(360), aIndianComoro(361), aIndianKerguelen(362), aIndianMahe(363), aIndianMaldives(364), aIndianMauritius(365), aIndianMayotte(366), aIndianReunion(367), aPacificApia(368), aPacificAuckland(369), aPacificChatham(370), aPacificChuuk(371), aPacificEfate(372), aPacificEnderbury(373), aPacificFakaofo(374), aPacificFiji(375), aPacificFunafuti(376), aPacificGalapagos(377), aPacificGambier(378), aPacificGuadalcanal(379), aPacificGuam(380), aPacificHonolulu(381), aPacificJohnston(382), aPacificKiritimati(383), aPacificKosrae(384), aPacificKwajalein(385), aPacificMajuro(386), aPacificMarquesas(387), aPacificMidway(388), aPacificNauru(389), aPacificNiue(390), aPacificNorfolk(391), aPacificNoumea(392), aPacificPago_Pago(393), aPacificPalau(394), aPacificPitcairn(395), aPacificPohnpei(396), aPacificPort_Moresby(397), aPacificRarotonga(398), aPacificSaipan(399), aPacificTahiti(400), aPacificTarawa(401), aPacificTongatapu(402), aPacificWake(403), aPacificWallis(404) } MAX-ACCESS read-write STATUS current DESCRIPTION "This attribute shall indicate the timezone of the system." ::= { timeSettings 2 } ntpClientEnable OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "This attribute shall indicate the NTP Enable." ::= { timeSettings 3 } provideNtpServer OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "This attribute shall indicate the Provided NTP Server." ::= { timeSettings 4 } ntpServerCandidates OBJECT-TYPE SYNTAX DisplayString (SIZE (1..256)) MAX-ACCESS read-write STATUS current DESCRIPTION "This attribute shall indicate the NTP Server Candidates connected by a semicolon." ::= { timeSettings 5 } -- ********************************************************************** -- * SYSLOG Server Setting Table -- ********************************************************************** logSettings OBJECT IDENTIFIER ::= { cpxWirelessMIB 15 } syslogBufferSize OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-write STATUS current DESCRIPTION "This attributes shall indicates the buffer size of syslog file in kiloBytes" ::= { logSettings 1 } syslogServerIp OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-write STATUS current DESCRIPTION "This attributes shall indicates the IP address of the syslog server. ***The value can only be set to a IP address in dot format." ::= { logSettings 2 } syslogServerPort OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-write STATUS current DESCRIPTION "This attributes shall indicates the Port of the Syslog server." ::= { logSettings 3 } -- ********************************************************* -- SNMP Settings Information -- ********************************************************* remoteSettings OBJECT IDENTIFIER ::= { cpxWirelessMIB 17 } snmpEnable OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "This attribute shall indicate whether SNMP Service is enabled." ::= { remoteSettings 1 } readOnlyCommunity OBJECT-TYPE SYNTAX DisplayString (SIZE (1..31)) MAX-ACCESS read-write STATUS current DESCRIPTION "The field indicates the read only community name. ***The value can only be set to 1 to 32 readable string." ::= { remoteSettings 2 } readWriteCommunity OBJECT-TYPE SYNTAX DisplayString (SIZE (1..31)) MAX-ACCESS read-write STATUS current DESCRIPTION "The field indicates the read write community name. ***The value can only be set to 1 to 32 readable string." ::= { remoteSettings 3 } restartSnmp OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-write STATUS current DESCRIPTION "This a command field for restarting SNMP. Set value 1 to restart SNMP service." ::= { remoteSettings 4 } trapSettings OBJECT IDENTIFIER ::= { remoteSettings 5 } trapEnable OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "This attribute shall indicate whether Trap Service is enabled." ::= { trapSettings 1 } trapServerIP OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-write STATUS current DESCRIPTION "The field indicates the trap server IP address. ***The value can only be set to a IP address in dot format. This field is effected after 'restartSnmp' is set to '1'." ::= { trapSettings 2 } trapServerPort OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-write STATUS current DESCRIPTION "The field indicates the trap server port. ***The value can only be set to a integer. This field is effected after 'restartSnmp' is set to '1' ." ::= { trapSettings 3 } snmpTraps OBJECT IDENTIFIER ::= { remoteSettings 6 } staOnlineTrap NOTIFICATION-TYPE STATUS current DESCRIPTION "A staOnlineTrap trap signifies that the SNMP entity, supporting a notification originator application, is reinitializing itself and that its configuration may have been altered. This trap appears immediately after a station connects with this AP" ::= { snmpTraps 1 } staOfflineTrap NOTIFICATION-TYPE STATUS current DESCRIPTION "A staOfflineTrap trap signifies that the SNMP entity, supporting a notification originator application, is reinitializing itself and that its configuration may have been altered. This trap appears immediately after a station disconnects with this AP or the AP restarts" ::= { snmpTraps 2 } END